Wir verwenden Cookies, um Zugriffe zu messen und passende Werbung auszuspielen. Bis Sie sich entscheiden, wird nichts gespeichert oder gesendet. Sie können Ihre Wahl jederzeit ändern.
Die Arbeitsformel, Hinweise zur Menge und Platzierungsregeln für Versand in den Golf.
"How many desiccant bags do I need for a 20ft or 40ft container?" is the question we get more than any other from importers shipping to the Gulf. There is no fixed number 鈥?the right quantity depends on the cargo, the voyage, the season and the climate at the destination port. This guide gives you a dosage table you can work from directly, a method you can run yourself, and the specification points that decide whether the system actually holds.
Two things have to be true at once. The total capacity has to exceed every gram of water vapour that enters the container over the voyage, and the absorption rate has to keep pace with the rate at which that vapour appears. The first decides whether you have enough; the second decides whether it gets there in time. So the quantity is never a constant 鈥?three variables drive it:
One myth worth clearing up first: timber at 15% moisture content does not release 3,000 kg of water on a 20-tonne load. What actually migrates is the thin surface layer coming into equilibrium with the air in the box 鈥?typically under 0.1% of the cargo weight, around 20 kg on 20 tonnes. That is why dosage is sized from container volume and cargo type, not from moisture content.
For a well-specified calcium chloride container desiccant the industry rule of thumb is 1 kg per 2鈥? cubic metres of container air. The 4 m鲁 end covers general dry cargo; the 2 m鲁 end covers hygroscopic cargo or long voyages. On a 20ft box at roughly 33 m鲁 that works out at 8鈥?6 units of 1 kg (our strips run 1 kg each, five to a chain pack). It sits deliberately on the conservative side 鈥?treat it as a ceiling and take the working number from the table below.
One point usually left out of dosage guides: calcium chloride will take up twice its own weight in water under lab conditions, but a container is not a lab. Across space, airflow and temperature swings, our own measurements show the strips finishing a voyage somewhere between 140% and 180% of their dry weight. Every calculation on this page uses 140% 鈥?the cautious end.
Die Tabelle nennt praktische Ausgangsmengen für Containertrockenmittel auf Calciumchlorid-Basis, die Standardwahl in der Seefracht. Nehmen Sie sie als Startpunkt und gehen Sie je nach Reisedauer, Warenart und Temperatur- und Feuchteschwankung im Container nach oben oder unten.
| Container | Innenraumvolumen | Allgemeine Fracht (indikativ) | Hygroskopische Fracht (indikativ) |
|---|---|---|---|
| 20 Fuß (TEU) | ~33 m鲁 | 6鈥?0 units of 1 kg | 10鈥?6 units of 1 kg |
| 40 Fuß (FEU) | ~67 m鲁 | 12鈥?0 units of 1 kg | 20鈥?2 units of 1 kg |
| 40ft High Cube | ~76 m鲁 | 14鈥?2 units of 1 kg | 22鈥?6 units of 1 kg |
These figures assume a typical 20鈥?0 day voyage in temperate-to-tropical conditions. For peak-season Gulf arrivals (Jun鈥揝ep), or for very damp cargo such as green timber or leather, take the top of the range or one step above it. They also assume a full container you control; consolidated LCL cargo needs a different allowance.
Die Tabelle deckt die meisten Sendungen ab. Bei ungewöhnlicher Ware oder langer Reise justieren Sie in vier Schritten:
An example. A 40ft high cube carrying 25 tonnes of green timber to Dubai in August, 25 days at sea. First, the table gives 22鈥?6 units for hygroscopic cargo; the load is damp, so take the top 鈥?36. Second, 25 days stays inside the 30-day baseline, so no voyage adjustment. Third, the top of the range already carries the safety margin, so nothing is added. Fourth, the ceiling check: 76 m鲁 梅 2 = 38 kg, and 36 sits under it with a little room. The shipment goes out with 36 units.
If the check ever lands below the table figure, something in the inputs is wrong 鈥?the cargo is drier than assumed, or the pack format should be a larger unit. Running two methods against each other is how you arrive at a number that is neither reckless nor wasteful.
In einer Ecke gestapeltes Trockenmittel schützt keinen vollen Container. Es muss dort sitzen, wo sich Kondensat tatsächlich bildet:
For ocean freight the default is calcium chloride: high capacity, and it keeps absorbing at high relative humidity. Silica gel suits sealed packaging 鈥?electronics, pharma, food 鈥?where the pack is airtight and humidity stays moderate; it is cleaner and will not leak. Plenty of exporters use both, sachets inside cartons and strips on the walls, as two layers of protection.
12鈥?0 units of 1 kg for general dry cargo, 20鈥?2 for hygroscopic cargo. A 40ft high cube takes 14鈥?2 and 22鈥?6 respectively.
Twice its own weight in theory. Under real ocean conditions our measurements come out at 140鈥?80%, and we size at 140%.
Inside sealed packaging, yes. For a full container, no 鈥?silica gel loses capacity sharply above 80% relative humidity and holds far less water per unit of volume.
Auf Warenhöhe oder etwas darüber. Die gleichmäßige Verteilung über die Länge zählt mehr als die Höhe.
Nennen Sie uns Containergröße, Warenart, Gewicht und Zielhafen, dann rechnen wir die genaue Stückzahl aus.